Cytec Carbon Fibers
Thornel® P-30X Continuous Pitch-Based Fiber
| Typical Properties**of
Thornel P-30X Continous Pitch-Based Fiber |
| Typical Values |
|
U.S. Customary Units |
SI Units |
| Fiber Characteristics |
|
Units |
|
Units |
| Tensile Strength |
300 |
ksi |
2.07 |
GPa |
| Tensile Modulus |
30 |
Msi |
207 |
GPa |
| Density |
0.072 |
lbs/in³ |
2.00 |
g/cc |
| Elongation at Break |
-- |
% |
|
|
| Filament Diameter |
10 |
micron |
|
|
| Carbon Assay |
98 |
% |
|
|
| Surface Area |
0.70 |
m²/g |
|
|
| Electrical Resistivity |
11 |
micro-ohm-m |
|
|
| Thermal Conductivity |
29 |
BTU/hrft°F |
22 |
W/mK |
| CTE at 70°F(21°C) |
-- |
|
-- |
ppm/°C |
| |
| Tow Count (1000s of filaments
per strand) |
| Strand Construction |
Units |
2K* |
|
| Yield |
yd/lb |
1,550 |
|
|
m/g |
3.11 |
|
| Linear Density |
g/m |
0.320 |
|
Fiber Area in Yarn
Cross Section |
in2x10-5 |
25 |
|
|
*K refers to 1,000's of filaments in a strand
**Typical properties, actual properties of individual lots will vary within
specification limits.
Thornel and ThermalGraph are registered trademarks, and EnerGraph is a trade
mark of Cytec Carbon Fibers LLC.
Technical information contained herein is furnished without charge or obligation
and is given and accepted at recipient's sole risk. Because conditions of
use may vary and are beyond our control, Cytec Carbon Fibers LLC makes no
representation about, and is not responsible or liable for the accuracy
or reliability of data, nor toxicological effects or industrial hygiene
requirements associated with particular uses of any product described herein.
Nothing contained in this document shall be considered a recommendation
for any use that may infringe patent rights, or an endorsement of any particular
material, equipment, service, or other item not supplied by Cytec Carbon
Fibers LLC. The properties and applications listed in this document are
not specification. They are provided as information only and in no way modify,
amend, enlarge or create any specification or warranty. |
